Bosch APC-AMC2-4R4CF - Connecting Relay Outputs

Access Modular Controller 2 Installing | en 75
Bosch Access Systems V.B. Installation manual 2020-01 | V02 |
4.16 Connecting Relay Outputs
To operate locks or alarm systems, the AMC2-4R4 has eight relay outputs. The outputs will be
connected to the 3-pin pluggable screw connectors S5, S6, S10, S11, S17, S18, S22, and S23
- refer to chapter Connecting Diagrams, page 102.
To operate locks or alarm systems, the AMC2-4W has eight relay outputs. The outputs will be
connected to the 3-pin pluggable screw connectors S5, S6, S10, S11, S17, S18, S22, and S23
- refer to chapter Connecting Diagrams, page 102.
The AMC2 8I-8O-EXT has the connectors S6 - 9 and S14 - 17, only.
Figure4.61: Location of the relay output connectors
Figure4.62: Location of the relay output connectors