Bosch APC-AMC2-4R4CF - Technical Data

Access Modular Controller 2 Technical Data | en 97
Bosch Access Systems V.B. Installation manual 2020-01 | V02 |
6 Technical Data
Hardware
– Integrated Microcontroller (32 bit, 30MHz)
– SRAM (256kB)
– Serial EEPROM
– RTC (real time clock)
– Pluggable Compact Flash card
– Battery for SRAM and RTC
– DIL switch for host settings (address and protocol mode)
– Host interfaces
– Ethernet 10/100Mbit/s
Hardware
– Integrated Microcontroller (32 bit, 30MHz)
– SRAM (256kB)
– Serial EEPROM
– RTC (real time clock)
– Pluggable
– Battery for SRAM and RTC
– DIL switch for host settings (address and protocol mode)
– Host interfaces
– Ethernet 10/100Mbit/s
– RS-485 2-wire or 4-wire Transfer rate:
38,4 kBit/s,
even parity, 7 bit, 1 stop bit
Hardware
– Integrated Microcontroller (32 bit, 30MHz)
– SRAM (256kB)
– Serial EEPROM
– RTC (real time clock)
– Pluggable Compact Flash card
– Battery for SRAM and RTC
– DIL switch for host settings (address and protocol mode)
– Host interfaces
– Ethernet 10/100Mbit/s
– RS-485 2-wire or 4-wire
Transfer rate: 38,4 kBit/s,
even parity, 7 bit, 1 stop bit,
– RS-232
Transfer rate: 38,4 kBit/s
no parity, 8 bit, 1 stop bit
Hardware
– Integrated Microcontroller (32 bit, 30MHz)
– SRAM (256kB)
– Serial EEPROM
– RTC (real time clock)
– Pluggable Compact Flash card
– Battery for SRAM and RTC
– DIL switch for host settings (address and protocol mode)
– Host interfaces