Bosch APC-AMC2-4R4CF - Support; Support Services and Resources

Access Modular Controller 2 Installing | en 53
Bosch Access Systems V.B. Installation manual 2020-01 | V02 |
4.8 Ethernet Host Interface
The AMC2-4R4 offers a 10/100 Mbit/s Ethernet auto-sensing interface to connect to a local
area network or host computer.
A complete connection diagram of the Ethernet host interface is shown in chapter Connecting
Diagrams, page 102.
The AMC2-4W offers a 10/100 Mbit/s Ethernet auto-sensing interface to connect to a local
area network or host computer.
Notice!
Use a CAT5 or higher version to connect the AMC2-4W with the network.
A complete connection diagram of the Ethernet host interface is shown in chapter Connecting
Diagrams, page 102.
Figure4.30: Location of the Ethernet interface
Figure4.31: Location of the Ethernet interface