Access Modular Controller 2 Installing | en 71
Bosch Access Systems V.B. Installation manual 2020-01 | V02 |
CTN Part Number
ARD-ProxPointPlus 4.998.141.821
ARD-MiniProx 4.998.141.822
ARD-Prox80 4.998.141.823
ARD-R10 4.998.127.612
ARD-R30 4.998.127.613
ARD-R40 4.998.127.614
ARD-RK40-AMC01 F.01U.514.655
Notice!
Reference UL Requirements for readers approved for UL installations.
Notice!
The terminal assignment shown above does not apply to the W1 readers ARD-R90-AKT00
(F.01U.030.232) and ARD-R90 (F.01U.027.003). Please use instead the installation guide of
the card reader itself.
The Wiegand reader interface of the AMC2-4R4 does not provide sufficient power for the
ARD-R90. Please plan an external power supply for the ARD-R90.
Wiegand reader type W 2
This wiring diagram refers to the following readers from the BOSCH catalog:
CTN Part Number
ARD-P0834-01 F.01U.028.449
ARD-H0834-01 F.01U.028.448
ARD-W2626-01 F.01U.028.443
ARD-W2634-01 F.01U.028.444
ARD-Prox26-01 F.01U.028.446
Notice!
The beeper will be controlled by the reader.
To Next Page
Loading...
