Bosch APC-AMC2-4R4CF - Page 77

Access Modular Controller 2 Installing | en 77
Bosch Access Systems V.B. Installation manual 2020-01 | V02 |
Figure4.66: Location of the relay output connectors
Each relay output can operate in ‘wet’ mode, using the AMC2-4R4's internal 12/24 Vdc power
supply for external devices or ‘dry’ mode with potential free contacts for externally powered
systems.
Figure4.67: Wet mode and dry mode of the AMC2 relay outputs
Each relay output can operate in ‘wet’ mode, using the AMC2-4W 's internal 12/24 Vdc power
supply for external devices or ‘dry’ mode with potential free contacts for externally powered
systems.
Figure4.68: Wet mode and dry mode of the AMC2 relay outputs