Bosch AVENAR 8000 User Manual

FPA-5000 | FPA-1200 | AVENAR panel 8000 |
AVENAR panel 2000 | AVENAR keypad 8000
Maintenance – history log | en 69
Bosch Sicherheitssysteme GmbH User Guide 2020-07 | 3.0 | F.01U.378.877
16 Maintenance – history log
In the history log, all data about particular events or device types is stored sorted by date and
time. To display only particular data, filters can be set.
In addition to a menu overview, this chapter contains information about the following points:
– Selecting filters, page 69
– Setting filters, page 69
– Change Filter, page 70
– Combining several filters, page 70
– Status bar functions, page 70
– Printing out data, page 70
16.1 Selecting filters
The following filters are available:
Filter Data, filtered by...
Without filter All data
Show all Delete filter Display all data with specification of event number, date,
time, element number and message type. Existing filters are
deleted.
Period Starting date, end date and time
Event types Message types, such as Fault
Device types Device types, such as Detectors
Address range Address range within a system
User commands Selected function fields, such as Acknowledge or Reset.
Walktest Elements switched to walktest mode
If one or more filters have been set, the Change filter field in the status bar is highlighted in a
dark color.
16.2 Setting filters
To display only particular data, a filter can be set.
Example:
To display only data that was stored in connection with a particular event, such as Fault:
1. In the start menu, select Maintenance
2. History log
3. Select the Event types filter.
A list of all event types is displayed.
4. Select a list field, e.g. Fault.
In the status bar, the Change filter field has a black background. See also Change Filter,
page 70 .
5. Select Show in history log.
A list of all fault messages is displayed. The events are sorted in ascending order by date
and time.
The fault messages are numbered chronologically. The leading number indicates the
sequence in which the fault messages were received.

Bosch AVENAR 8000 Specifications

General

Number of Detectors per Loop	254
Number of Control Panel per Network	32
IP Communication	Yes
Resolution	800 x 480 pixels
Touchscreen	Yes
Operating System	Linux-based
Memory	512 MB RAM, 4 GB Flash
Power Supply	24 V DC
Protection Class	IP30
Loop Capacity	4 loops
Connectivity	Ethernet, USB, RS485
Panel Type	Modular fire alarm panel