EasyManuals Logo

Bosch AVENAR 8000 User Manual

Bosch AVENAR 8000
94 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #81 background imageLoading...
Page #81 background image
FPA-5000 | FPA-1200 | AVENAR panel 8000 |
AVENAR panel 2000 | AVENAR keypad 8000
Further functions | en 81
Bosch Sicherheitssysteme GmbH User Guide 2020-07 | 3.0 | F.01U.378.877
19 Further functions
This chapter contains information about the following points:
Change Date / Time, page 81
Master password, page 81
Remote Services, page 82
Change password, page 83
Performing a fire drill, page 83
Alarm Counters, page 84
19.1 Menu overview
Further functions -> Change date / time Master password
Remote Services Change password
Drill Alarm counters
19.2 Change Date / Time
To change the date and time:
1. In the start menu, select Further functions
2. Change date / time
3. Touch the field you require and enter a new value.
4. Select OK to confirm the entry or Cancel to cancel the operation.
The new values for date and time are accepted into the system.
19.3 Master password
Notice!
With the master password, all functions can be operated and passwords and names can be
changed.
One of the following two options is offered:
Entering a master password that is valid indefinitely. This password cannot be changed
and is available from the relevant Bosch branch on request.
Entering a master password that is valid for a specified period of time.
This password is only valid for 24 hours. The panel controller can issue a number on
request. This number must be forwarded to the Support department. The Support
department can then issue a 24-hour password.
After the password has been entered, various options are offered.
19.3.1 Enter the master password that is valid indefinitely
1. In the start menu, select Further functions
2. Master password
3. Enter the master password.
4. Select OK to confirm the entry or Cancel to cancel the operation.
The master password is accepted and the operator is logged in.
The user passwords can now be changed:
Select Change password.
Additional options may be offered.
19.3.2 Enter the 24-hour master password
The following procedure must be followed in order to obtain a 24-hour master password:

Table of Contents

Other manuals for Bosch AVENAR 8000

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Bosch AVENAR 8000 and is the answer not in the manual?

Bosch AVENAR 8000 Specifications

General IconGeneral
Number of Detectors per Loop254
Number of Control Panel per Network32
IP CommunicationYes
Resolution800 x 480 pixels
TouchscreenYes
Operating SystemLinux-based
Memory512 MB RAM, 4 GB Flash
Power Supply24 V DC
Protection ClassIP30
Loop Capacity4 loops
ConnectivityEthernet, USB, RS485
Panel TypeModular fire alarm panel

Related product manuals