76 en | Day and night mode
FPA-5000 | FPA-1200 | AVENAR panel 8000 |
AVENAR panel 2000 | AVENAR keypad 8000
2022-01 | 5.0 | F.01U.378.877
User Guide
Bosch Sicherheitssysteme GmbH
2. Enter the numbers you require.
Select OK to confirm the entry or Cancel to cancel the operation.
The entries are confirmed.
To change the set back time in day mode to night mode:
1. On the status bar, select
2. or
In the start menu, select Switch to night mode.
3. Select Change time.
4. Enter the numbers you require.
Select OK to confirm the entry or Cancel to cancel the operation.
To Next Page
Loading...
