Bosch DCNM-SERVER - Router Requirements

DICENTIS System installation design and planning | en 21
Bosch Security Systems B.V.
Hardware Installation Manual
2021.01 | V2.2 |
Routers
The following minimal requirements apply to routers:
– 1Gbit or higher Ethernet ports.
– Supports PIM‑DM or Bidirectional PIM.
– Performs IP routing in hardware (i.e. a ‘layer 3 switch’) to minimize the routing delay.
– Packet forwarding rate > 1,000,000 packets per second per port (e.g. 8Mpps for an
8‑port router).
– Non-blocking backplane per switching port, i.e. 2Gbit per port (e.g. 16Gbps for an
8‑port router).
– MAC address table of at least 1000 addresses per directly connected subnet.