Bosch DCNM-SERVER - Name Card Holder

DICENTIS Mechanical installation of Contribution Devices | en 75
Bosch Security Systems B.V.
Hardware Installation Manual
2021.01 | V2.2 |
7.6 DCNM-NCH Name Card Holder
The name card holder (1) can be used to permanently display the participant’s name on the
rear of a DICENTIS multimedia Device. The name card holder has two magnets (2) that allow it
to be easily attached to, and removed from, the rear of the device.
Figure7.11: DCNM‑NCH assembly
Item Description
1 Name card holder.
2 Magnets.
i
Notice!
A paper insert template is included on the DVD that can be downloaded at: https://
licensing.boschsecurity.com/software