Bosch DIVAR IP all-in-one 6000 Installation Manual

DIVAR IP all-in-one 6000 Introduction | en 13
Bosch Security Systems B.V.
Installation manual
2022-10 | V02 | F.01U.407.903
2 Introduction
This manual is written for professional system integrators and PC technicians. It provides
information for the installation of DIVAR IP all-in-one 6000. The installation should be done by
experienced and qualified technicians only.
Before you start the installation, read and follow the safety instructions.
2.1 Parts included
Make sure that all parts are included and not damaged. If the packaging or any parts are
damaged, contact your shipper. If any parts are missing, contact your Sales or Customer
Service Representative.
DIP‑6440IG‑00N
Quantity Component
1 DIVAR IP all-in-one 6000
1 Rack mount kit (including two outer rails, two inner rail extensions and a
bag with screws)
1 Installation manual (English)
1 Registration leaflet
2 Power cord EU
2 Power cord US
5 Labels for hard drive trays (numbered 0-4)
18 Hard drive screws
DIP‑6444IG‑4HD, DIP‑6448IG‑4HD, DIP‑644IIG‑4HD
Quantity Component
1 DIVAR IP all-in-one 6000
1 Rack mount kit (including two outer rails, two inner rail extensions and a
bag with screws)
1 Installation manual (English)
1 Registration leaflet
2 Power cord EU
2 Power cord US
5 Labels for hard drive trays (numbered 0-4)
2.2 Product registration
Register your product under:
https://www.boschsecurity.com/product-registration/

Bosch DIVAR IP all-in-one 6000 Specifications

General

Brand	Bosch
Model	DIVAR IP all-in-one 6000
Category	Network Hardware
Language	English