Bosch DIVAR IP all-in-one 6000 Installation Manual

DIVAR IP all-in-one 6000 Table of contents | en 3
Bosch Security Systems B.V.
Installation manual
2022-10 | V02 | F.01U.407.903
Table of contents
1
Safety 5
1.1 Safety message explanation 5
1.2 Installation precautions 5
1.3 Electrical safety precautions 6
1.4 ESD precautions 8
1.5 Operating precautions 8
1.6 Service and maintenance precautions 9
1.6.1 Cleaning 10
1.7 Cybersecurity precautions 10
1.8 FCC compliance 11
1.9 Software precautions 11
1.9.1 Use latest software 11
1.9.2 OSS information 11
2
Introduction 13
2.1 Parts included 13
2.2 Product registration 13
3
System overview 15
3.1 Device views 16
3.2 Control panel elements 16
3.3 Hard drive tray LEDs 17
3.4 LAN, IPMI and UID LEDs 18
4
Preparing for installation 19
4.1 Choosing the installation location 19
4.2 Rack precautions 19
4.3 General system precautions 19
4.4 Installation considerations 20
5
Rack installation 21
5.1 Installing the inner rail extensions on the chassis 21
5.2 Installing the outer rails to the rack 22
5.2.1 Preparing the outer rails for installation to the rack 22
5.2.2 Installing the outer rails in a square-hole rack 23
5.2.3 Installing the outer rails in a round-hole threaded rack 24
5.2.4 Installing the outer rails in a round-hole rack 25
5.3 Installing the chassis in the rack 26
6
Installing a SATA hard drive 28
6.1 Installing a Bosch-supplied hard drive 28
6.2 Installing a non-Bosch-supplied hard drive 30
7
Turning on the unit 33
8
System setup 34
8.1 Default settings 34
8.2 Prerequisites 34
8.3 Operation modes 34
8.4 First sign-in and initial system setup 35
8.4.1 Choosing operation mode BVMS 36
8.4.2 Choosing operation mode VRM 37
8.4.3 Choosing operation mode iSCSI storage 37
8.5 Signing in to the administrator account 38
8.6 Configuring new hard drives 38

Bosch DIVAR IP all-in-one 6000 Specifications

General

Brand	Bosch
Model	DIVAR IP all-in-one 6000
Category	Network Hardware
Language	English