Bosch DIVAR IP all-in-one 6000 Installation Manual

DIVAR IP all-in-one 6000 Installing a SATA hard drive | en 29
Bosch Security Systems B.V.
Installation manual
2022-10 | V02 | F.01U.407.903
1
2
1 Release button 2 Hard drive tray handle
i
Notice!
Except for short periods of time (swapping hard drives), do not operate the unit with the
hard drives removed from the bays.
Installing a hard drive tray into a hard drive bay
To install a hard drive tray into a hard drive bay:
1. Insert the hard drive tray horizontally into the hard drive bay, orienting the hard drive tray
so that the release button is on the right.
2. Push the hard drive tray into the bay until the handle retracts and the hard drive clicks
into the locked position.

Bosch DIVAR IP all-in-one 6000 Specifications

General

Brand	Bosch
Model	DIVAR IP all-in-one 6000
Category	Network Hardware
Language	English