Bosch DIVAR IP all-in-one 6000 Installation Manual

DIVAR IP all-in-one 6000 Safety | en 7
Bosch Security Systems B.V.
Installation manual
2022-10 | V02 | F.01U.407.903
i
Notice!
Permanently connected devices must have an external, readily operable mains plug or all‑pole
mains switch in accordance with installation rules.
i
Notice!
Pluggable devices must have an easily accessible electrical outlet installed near the
equipment.
!
Warning!
Interruption of mains supply:
Voltage is applied as soon as the mains plug is inserted into the mains socket.
However, for devices with a mains switch, the device is only ready for operation when the
mains switch (ON/OFF) is in the ON position. When the mains plug is pulled out of the
socket, the supply of power to the device is completely interrupted.
!
Warning!
Do not put any objects in the openings of this product. The objects may touch dangerous
voltage points or short-circuit components, which could result in a fire or electrical shock.
!
Caution!
Power supply cords
Make sure to route the power supply cords in a way so that they are protected from any
possible damage.
!
Warning!
To prevent electrical shock hazard, disconnect all power cables from the electrical outlet
before relocating the system.
!
Caution!
Disconnect power cables before installing or removing any components from the device.
i
Notice!
When disconnecting power, first turn off the system and then unplug the power cord from the
power supply module in the system.
i
Notice!
Be aware of the locations of the power on/off switch on the device as well as the room's
emergency power-off switch, disconnection switch or electrical outlet. If an electrical
accident occurs, you can then quickly remove power from the system.

Bosch DIVAR IP all-in-one 6000 Specifications

General

Brand	Bosch
Model	DIVAR IP all-in-one 6000
Category	Network Hardware
Language	English