Easy Series (ICP-EZM2) | Installer Guide | 7.0 Reference Materials
68 Bosch Security Systems, Inc. | 5/07 | F01U025147-01
7.7 Agency Approvals and Requirements
7.7.1 Certifications and Approvals
Compliance with specific standards, such as SIA CP-01 and DD243, reduces false alarms and is required in
many locations.
The Easy Series Intrusion Control Panel is designed to comply with the following certifications, approvals, and
standards:
• ANSI/SIA CP-01 False Alarm Immunity
•
*
• EN50131-1 Security Grade 2,
Environmental Class II*
• DD243*
• PD6662*
• CCC*
• UL Standards:
- UL365, Police Station Burglar Alarm Units and
Systems
- UL609, Local Burglar Alarm Units and Systems
- UL985, Household Fire Warning System Units
- UL1023, Household Burglar-alarm System Units
- UL1076, Proprietary Burglar Alarm Units and
Systems
• cUL Standards:
- CAN/ULC-S304-M88, Central and
Monitoring Station Burglar Alarm Units
- CAN/ULC-S545, Residential Fire Warning
System Control Units
- C1023, Household Burglar Alarm Units
- CAN/ULC-S303, Local Burglar Alarm Units
and Systems
- C1076, Proprietary Burglar Alarm Units and
Systems
• FCC
• Industry of Canada (IC)
• A-Tick*
• C-Tick*
• TBR21 for PSTN*
• INCERT (Belgium) *
• CSFM Listing – Control Unit Household
• Japan Approvals Institute for
Telecommunications Equipment (JATE) *
* Not investigated by Underwriters Laboratories, Inc.
7.7.2 FCC
Part 15
This equipment was tested and found to comply with the limits for a Class B digital device, pursuant to Part 15
of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when
the equipment is operated in a commercial environment.
This equipment generates, uses, and can radiate radio frequency energy. If this equipment is not installed and
used according to this document, it might cause harmful interference to radio communications.
Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user
must correct the interference.
To Next Page
Loading...
