Bosch ICP-EZM2 - Programming; Basic Programming

Easy Series (ICP-EZM2) | Installer Guide | 4.0 Programming
.
Bosch Security Systems, Inc. | 5/07 | F01U025147-01 43
4.3.4 Report Routing Programming Items
Point Report and Restoral Routing
Programming Item Item Number Description Entry
Point Reports and Restorals (all) 301
Enter a value in Expert Programming Item
Number 301 to globally set all of the
following Point reports and Point Restoral
reports to the same entry.
3
Intrusion Alarm 307
3
Intrusion Alarm Verified 308
3
Intrusion Alarm Unverified 309
3
Intrusion Alarm 24-hr 310
3
Intrusion Alarm 24-hr Restoral 311
3
Intrusion Alarm Restoral 312
3
Duress 313
3
Fire Alarm 315
3
Fire Alarm Unverified 316
3
Fire Alarm Restoral 317
3
Panic 318
3
Cancel 323
3
Intrusion Trouble 324
3
Intrusion Trouble Restoral 325
3
Intrusion Zone Bypass 326
3
Intrusion Zone Bypass Restoral 327
3
Fire Trouble 328
3
Fire Trouble Restoral 329
3
Point Missing 333
3
Point Missing Restoral 334
3
Wireless Point Tamper 335
3
Wireless Point Tamper Restoral 336
3
Wireless Point Low Battery 360
3
Wireless Point Low Battery Restoral 361
3
Point Tamper 388
3
Cross Zone Trouble 393
3
Alarm Recent Close 394
3
Panic Restoral 399
3
Cross Zone Trouble Restoral 400
3
Swinger Shunt Bypass 401
3
Swinger Shunt Restoral 402
To modify only a specific report, enter a
value in that report’s item number.
0 = Neither route
1 = Route 1 only
Primary and Backup (if programmed)
2 = Route 2 only
Primary and Backup (if programmed)
3 = Both routes
Primary and Backup (if programmed)
3