Bosch ICP-EZM2 - Page 44

Easy Series (ICP-EZM2) | Installer Guide | 4.0 Programming
44 Bosch Security Systems, Inc. | 5/07 | F01U025147-01
System On and Off Report Routing
Programming Item Item Number Description Entry
System On and Off
(open and close) Reports (all)
302
Enter a value in Expert Programming Item
Number 302 to globally set all of the
following Point reports and Point Restoral
reports to the same entry.
3
Exit Error 314
3
Recent Closing 330
3
Close (System On) Unoccupied 337
3
Close (System On) Occupied 338
3
Close Keyswitch 339
3
Close Remote 340
3
Open 341
3
Open Keyswitch 342
3
Open Remote 343
3
Close (System On) Custom 344
3
Partial Close (System On) 403
To modify only a specific report, enter a
value in that report’s item number.
0 = Neither route
1 = Route 1 only
Primary and Backup (if programmed)
2 = Route 2 only
Primary and Backup (if programmed)
3 = Both routes
Primary and Backup (if programmed)
3
System Report and Restoral Routing
Programming Item Item Number Description Entry
System Reports and Restorals (all) 303
Enter a value in Expert Programming Item
Number 303 to globally set all of the
following Point reports and Point Restoral
reports to the same entry.
3
User Emergency* 319
3
User Fire* 320
3
User Fire Restoral 321
3
User Panic* 322
3
AC Fail 345
3
AC Fail Restoral 346
3
Auto System Test Normal 347
3
Auto System Test Off-Normal 348
3
Auxiliary Power Fault 349
3
Auxiliary Power Restoral 350
3
Communication Fail 351
3
Communication Restoral 352
3
Control Center Supervision Fail 353
3
Control Center Supervision
Restoral
354
3
Control Center Tamper 355
3
Control Center Tamper Restoral 356
To modify only a specific report, enter a
value in that report’s item number.
0 = Neither route
1 = Route 1 only
Primary and Backup (if programmed)
2 = Route 2 only
Primary and Backup (if programmed)
3 = Both routes
Primary and Backup (if programmed)
3
* To enable the control center’s emergency buttons, ensure that the following programming items are set
accordingly:
Programming Item Item Number Setting
User Emergency 319 1, 2, or 3 (refer above for descriptions)
Medical Button Alarm 889 1 (refer to Global Control Center Items on page 52 for descriptions)
User Fire 320 1, 2, or 3 (refer above for descriptions)
Fire Button Alarm 888 1 (refer to Global Control Center Items on page 52 for descriptions)
User Panic 322 1, 2, or 3 (refer above for descriptions)
Panic Button Alarm 890 1 or 2 (refer to Global Control Center Items on page 52 for descriptions)
Check the appropriate box in the Easy Series User Guide (P/N: F01U025111) to identify which buttons are
enabled.