MY23P0a -52_1.0_11.10.2022
115
Assembly
5.3.2 Adjusting the suspension system to body weight
Not included in price
Steel suspension in suspension forks and seat
posts are designed to bear body weight. If the
body weight is exceeded or not reached, the
suspension system will no longer function as
intended. This has no effect on the fork’s or seat
post’s approved load capacity but the suspension
system will no longer function perfectly or it won’t
work at all.
Adjust all components such as suspension
forks or suspension seat posts with steel
springs to the rider’s body weight.
5.3.2.1 Adjusting SR Suntour suspension
elements
Not included in price
SR SUNTOUR steel suspension forks and
parallelogram seat posts are available in three
different hardness types for different body
weights:
Unless specified otherwise, SR Suntour forks and
seat posts are supplied with medium hardness ex
factory.
A harder and a softer suspension hardness are
available so that the suspension fork can be
adjusted to the rider’s body weight.
Figure 83: SR Suntour coil spring hard
1 Ask about body weight before selling the
pedelec.
2 Compare with Table 49
.
3 If the body weight differs from the
specifications, order suitable spring elements
from SR Suntour and install them.
Seat post and forks are components that may be
replaced after approval by the vehicle or parts
manufacturer.
Replacing with different sizes and hardnesses
within a product series is permitted for seat
posts.
Coil spring model Soft Medium Rigid
Max. bodyweight [kg] 50 ... 75 70 ... 95 90 ... 120
Table 49: Suspension hardness and body weight
To Next Page
Loading...
