EasyManua.ls Logo

Bosch Intuvia 100 - Hub

Bosch Intuvia 100
350 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
MY23P0a -52_1.0_11.10.2022
56
Description
3.3.3.7 Hub
The hub is located in the centre of the wheel. The
hub is connected to the rim and tyre with the
spokes. An axle runs through the hub, connecting
the hub with the fork at the front and with the
frame at the rear.
The hub’s main task is to transfer the pedelec’s
force of weight to the tyres. Special hubs on the
rear wheel perform additional functions. There is
a distinction between five types of hub:
Hubs without additional features
Brake hub (see back-pedal brake)
Gear hub, also known as a hub gear
Generator hub (for bicycles only)
Motor hubs (for front- and rear-driven pedelecs
only).
Hub without additional features
The front wheel hubs on pedelecs with central or
rear motors are normally hubs without additional
features.
Figure 38: Example of front wheel hub: SHIMANO
1 Hub axle
2 Quick release
3 Hub body
4 Ball bearings
1
2
3
4
4

Table of Contents

Other manuals for Bosch Intuvia 100

Related product manuals