MY23P0a -52_1.0_11.10.2022
13
About these operating instructions
1 About these operating instructions
1.1 Manufacturer
ZEG Zweirad-Einkaufs-Genossenschaft eG
Longericher Strasse 2
50739 Köln, Germany
Tel.: +49 221 17959 0
Fax: +49 221 17959 31
Email: info@zeg.de
1.2 Laws, standards and directives
The operating instructions comply with the
essential requirements specified in:
• Machinery Directive 2006/42/EC
• Electromagnetic Compatibility Directive
2014/30/EU
• ISO 20607:2018 Safety of machinery –
Instruction handbook – General drafting
principles
• EN 15194:2018 Cycles – Electrically power
assisted cycles – pedelec bicycles
• EN 11243:2016 Cycles – Pannier racks for
bicycles – Requirements and test methods
• ISO 17100:2016-05 Translation Services –
Requirements for translation services.
1.3 Language
The original operating instructions are written in
German. A translation is invalid without the
original operating instructions.
1.4 For your information
Different markings are used in the operating
instructions to make them easier to read.
1.4.1 Warnings
Warnings indicate hazardous situations and actions.
You will find three categories of warnings in the
operating instructions:
1.4.2 Markups
You will find ten text markups in the operating
instructions:
Text for specialist dealers
Notice on replacing components
Notice on fitness
May lead to serious or even fatal injuries if
ignored. Medium-risk hazard.
May lead to minor or moderate injuries if ignored.
Low-risk hazard.
Notice
May lead to material damage if ignored.
Stylised form Use
Italics Glossary term, first mention in
section
Underlined in blue
Link
Underlined in grey
Cross references
Requirements
Instructions for actions without
specific order
3
Instructions for actions in
specified order
Result of the action
SPACED Indicators on the display screen
• Bulleted lists
Only applies to pedelecs
with this equipment
A note beneath the heading
indicates components which can
be used as an option
Table 1: Markups
To Next Page
Loading...
