Bosch Intuvia 100 - Adjusting the Suntour Rear Frame Damper

MY23P0a -52_1.0_11.10.2022
163
Operation
6.5.16.1 Adjusting the Suntour rear frame damper
Only applies to pedelecs with this equipment
Figure 146: Position of RS Suntour rebound adjuster wheel for rear frame dampers Triair2 (a), Triair (b), EDGE-comp (c),
EDGE (d) and RAIDON (e)
 The sag in the rear frame damper is adjusted.
 Turn rebound adjuster wheel clockwise.
 The rebound movement is slower; rebound
damping is increased.
 Turn rebound adjuster wheel anti-clockwise.
 The rebound movement is faster; rebound
damping is less forceful.
1
abc d e