EasyManua.ls Logo

Bosch Intuvia 100 - Calculating the Saddle Width; Selecting the Saddle Hardness; Adjusting the Saddle Hardness

Bosch Intuvia 100
350 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
MY23P0a -52_1.0_11.10.2022
133
Operation
6.5.4.5 Calculating the saddle width
Depending on the position, the following value is
added to the minimum saddle width.
Table 54: Calculating the saddle width
6.5.4.6 Selecting the saddle hardness
Saddles are available in a wide range of
hardnesses and must be adapted to the pedelec’s
use:
A pedelec that is mainly used for commuting in
jeans calls for a soft saddle.
A pedelec that is mainly used for sports riding with
padded cycling shorts requires a hard saddle.
If the degree of hardness is not suitable, a new
saddle must be selected.
6.5.4.7 Adjusting the saddle hardness
Only applies to pedelecs with this equipment
In air cushion saddles, the hardness of the saddle
can be adjusted using the pump valve beneath the
seat surface.
Table 55: VELO air cushion saddle settings
Position on roadster + 4 cm
Position on city bike + 3 cm
Position on trekking bike + 2 cm
Position on sports bike + 1 cm
Triathlon/time trials + 0 cm
Soft Pump 3 times
Medium Pump 5 times
Hard Pump 10 times

Table of Contents

Other manuals for Bosch Intuvia 100

Related product manuals