EasyManua.ls Logo

Bosch Intuvia 100 - Gear Shift; Replacing the Gear Shift; Adjusting the SHIMANO Shifter

Bosch Intuvia 100
350 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
MY23P0a -52_1.0_11.10.2022
148
Operation
6.5.10 Gear shift
Adjust the position of the gear shift to the pedelec
riders’ needs.
1 Undo attachment screw.
2 Place control panel or shifter into the position
where the pedelec rider can use the control
panel or the shifter with their thumb and/or
index finger. The shifter must never block the
handbrake.
3 Tighten attachment screw.
6.5.10.1 Replacing the gear shift
Not included in price
6.5.10.2 Adjusting the SHIMANO shifter
Only applies to pedelecs with this equipment
Figure 133: Position of attachment screw in SHIMANO shifter (1)
All gear shift components (rear derailleur, shifter,
twist grip, shift cables and sleeves) may be
replaced provided that:
They are approved for use on e-bikes
All gear shift components are suitable for the
number of gears
All gear shift components are compatible with
one another
It is permitted to change from an electronic gear
shift variant to a mechanical one.
It is prohibited to change from a mechanical gear
shift variant to an electronic one.
§
1

Table of Contents

Other manuals for Bosch Intuvia 100

Related product manuals