Bosch Intuvia 100 - Activating the Lock Function

MY23P0a -52_1.0_11.10.2022
200
Operation
6.22.3 Activating the lock function
Only applies to pedelecs with this equipment
 Remove the on-board computer used during
set-up.
 The lock function is activated. The drive
system now provides no assistance However,
the rider can continue to use the pedelec
without assistance.
 The drive unit will emit a lock sound (an audible
signal) as long as the drive system is switched
on.
 The lock function status is displayed with a lock
icon on the on-board computer for around
3 seconds.