MY23P0a -52_1.0_11.10.2022
170
Operation
6.5.18.11 Adjust on-board computer
The pedelec is stationary. You cannot open and
adjust the settings while riding.
Inserting the display.
Switching on the electric drive system.
1 Press the Select button until <SETTINGS>
appears on the text display.
The <BASIC SETTINGS> menu is now open.
2 Press the Forward button or the Back button
until the required setting appears on the text
display.
3 Change the settings. Follow the instructions on
the display to do so.
Press the select button briefly until in the
required value is displayed to change the basic
settings.
Press the Back button if the setting is correct.
You now exit the submenu. The changed
values are saved automatically when you exit
the submenu.
4 Press the select button briefly.
The <BASIC SETTINGS> menu is now closed.
6.5.18.12 Selecting the language
1 Open the <Language> submenu.
2 Press the select button briefly until the
required language is displayed.
3 Press the Back button.
You now exit the submenu. The language has
been set.
6.5.18.13 Selecting units
1 Open <Units> submenu.
2 Press the Select button briefly to choose
between kilometres and miles.
3 Press the Back button.
You now exit the submenu. The unit has been
selected.
6.5.18.14 Adjusting the clock
1 Open the <Time> submenu.
2 Follow the instructions on the on-board
computer.
The time has been set.
3 Press the Back button if the correct time has
been set.
You now exit the submenu. The clock has been
set.
6.5.18.15 Setting the time format
1 Open <Time format> submenu.
2 Press the Select button briefly to choose
between 12- and 24- hour format.
3 Press the Back button.
You now exit the submenu. The Time Format is
set.
6.5.18.16 Setting the shift recommendation
1 Open <Shift recommendation> submenu.
2 Press the Select button briefly to choose
between on and off.
3 Press the Back button.
You now exit the submenu. The shift
recommendation has been set.
Submenu Explanation
Change/exit basic settings
<Language> Sets preferred display lan-
guage
<Units> Sets speed and distance to
kilometres or miles
<Time> Adjusts the clock
<Time format> Sets to 12- or 24-hour format
<Shift recommendation> Switches shift recommenda-
tions on or off
<Backlight> Sets duration of backlight acti-
vation
<Brightness> Adjusts the display brightness
<Settings reset> Resets all settings to their fac-
tory settings
Table 66: Basic menu and submenu structure for Intuvia 100
To Next Page
Loading...
