Bosch Intuvia 100 - Adjusting the On-Board Computer

MY23P0a -52_1.0_11.10.2022
169
Operation
6.5.18.10 Adjusting the on-board computer
Figure 155: BOSCH LED Remote operating elements
You can use the forward button (1) and back
button (2) to access the different user interfaces
with information on ride values even when riding.
This means both hands remain on the handlebars
while you are cycling.
You can use the plus button (4) and the minus
button (5) to increase and decrease the level of
assistance. You can use the buttons to scroll up
and down a list (such as the SETTINGS menu).
Opening the screens
 Press the Forward button or Back button.
 A new screen is displayed.
Open Status screen
1 Open the START SCREEN.
2 Press the Back button.
 The STATUS SCREEN is displayed.
Notice
 Never use on-board computer, the display or
the display mount as a handle. If the on-board
computer, display or display mount are used to
lift the pedelec, components can become
irreparably damaged.
Symbol Designation
1
>
Increase brightness button/
Forward button (scroll left)
2
<
Decrease brightness button/
Back button (scroll right)
3 Select button
4
+
Plus button/
light button
5
–
Minus button/
push assist button
Table 65: Description of BOSCH LED Remote operating
elements
1
2
3
4
5