Bosch Intuvia 100 - Riding Light; Replacing the Headlight; Replacing the Rear Light and (Spoke) Reflector; Setting the Riding Light

MY23P0a -52_1.0_11.10.2022
164
Operation
6.5.17 Riding light
6.5.17.1 Replacing the headlight
Not included in price
6.5.17.2 Replacing the rear light and (spoke)
reflector
Not included in price
6.5.17.3 Setting the riding light
Example 1
If the headlight is positioned too high, oncoming traffic will be dazzled. This can cause a serious accident
with fatalities.
Example 2
Positioning the headlight correctly can ensure that oncoming traffic is not dazzled and no-one is put at risk.
Example 3
If the headlight is positioned too low, the space ahead is not illuminated to an optimum extent and the
rider's vision is reduced in the dark.
Figure 147: Light positioned too high (1), correctly (2) and too low (3)
Headlights may only be replaced after approval
by the manufacturer or system provider.
§
The rear light and (spoke) reflector may be
replaced without special approval provided they
comply with the laws of the country where the
pedelec will be ridden.
§
1
2
3