MY23P0a -52_1.0_11.10.2022
209
Cleaning, maintenance and inspection
7.3.4 Clean Frame, fork, pannier rack,
guards and kickstand
1 Soak the components with dish-washing
detergent if the dirt is thick and ingrained.
2 After leaving it to soak for a short time, remove
the dirt and mud with a sponge, brush and
toothbrushes.
3 Rinse off the components with water from a
watering can.
4 Wipe away oil stains with a degreaser.
7.3.5 Cleaning the stem
1 Clean stem with a cloth and soapy water.
2 Rinse off component with water from a
watering can.
7.3.6 Cleaning the handlebars
1 Clean handlebars, including handles and all
gears or twist grips, with a cloth and soapy
water.
2 Rinse off component with water from a
watering can.
7.3.7 Clean handles
1 Clean handles with sponge, water and soapy
water.
2 Rinse off component with water from a
watering can.
3 Care for rubber handles after cleaning (see
Section 7.4.8).
7.3.7.1 Cleaning leather handles
Leather is a natural product and has similar
properties to human skin. Regular cleaning and
care help to prevent leather dehydrating, fading or
becoming brittle or stained.
1 Remove dirt with a soft, damp cloth.
2 Remove stubborn stains with a leather cleaner.
3 Care for leather handles after cleaning (see
Section 7.4.8.2).
7.3.8 Cleaning the seat post
1 Clean seat post with a cloth and soapy water.
2 Rinse off component with water from a
watering can.
3 Wipe away any grease or assembly paste
residue with a cloth and degreaser.
To Next Page
Loading...
