Bosch Intuvia 100 - Page 4

MY23P0a -52_1.0_11.10.2022
4
Contents
3.5 Technical data 87
3.5.1 Pedelec 87
3.5.2 Emissions 87
3.5.3 Bicycle lighting 87
3.5.4 Display BDS3YYY 87
3.5.5 LED Remote on-board computer 87
3.5.6 BOSCH Intuvia 100 display 87
3.5.6.1 BOSCH Performance Line CX motor 88
3.5.7 Rechargeable battery 88
3.5.7.1 BOSCH PowerTube 500 battery 88
3.5.7.2 BOSCH PowerTube 625 battery 88
3.5.7.3 BOSCH PowerTube 750 battery 88
3.5.7.4 BOSCH PowerPack 545 battery 89
3.5.7.5 BOSCH PowerPack 725 battery 89
3.5.8 Tyres 90
3.5.8.1 SCHWALBE puncture protection level 90
3.5.9 Saddle 91
3.5.9.1 BROOKS ENGLAND saddle width 91
3.5.9.2 ERGON 91
3.5.9.3 SELLE ROYAL saddle width 91
3.5.9.4 LIMOTEC seat post, A1/A1L 92
3.5.10 Seat post 94
3.5.10.1 LIMOTEC A3/A3 Plus suspension seat post 94
3.5.11 SR SUNTOUR NCX seat post 96
3.5.12 Torque 97
4 Transporting and storing
4.1 Weight and dimensions for transportation 108
4.2 Designated handles, lifting points 108
4.3 Transportation 109
4.3.1 Using the transport securing system 109
4.3.2 Transporting the pedelec 109
4.3.2.1 By car 109
4.3.2.2 By train 109
4.3.2.3 By local transport 110
4.3.2.4 By long-distance bus 110
4.3.2.5 On flights 110
4.3.3 Shipping a pedelec 110
4.3.4 Transporting the battery 110
4.3.5 Shipping the battery 110
4.4 Storing 111
4.4.1 Pedelec 111
4.4.2 On-board computer, display and charger 111
4.4.3 Rechargeable battery 111
4.4.4 Break in operation 112
4.4.4.1 Preparing a break in operation 112
4.4.4.2 Carrying out a break in operation 112
5 Assembly
5.1 Unpacking 113
5.2 Required tools 113
5.3 Commissioning 114
5.3.1 Checking the battery 114
5.3.2 Adjusting the suspension system to body weight 115
5.3.2.1 Adjusting SR Suntour suspension elements 115
5.3.3 Adjusting the LIMOTEC seat post 116
5.3.4 Installing the wheel in the SUNTOUR fork 117
5.3.4.1 Screw-on axle (12AH2 and 15AH2) 117
5.3.4.2 20 mm cross axle 118
5.3.4.3 Q-LOC quick release 120