Bosch NurseCall Main Unit - Tracking Function; Dementia Criterion; Assistance Alarm from S35 Q, S37 Q and S37 L Transmitters

NurseCall Main Unit Programming | en 33
Bosch Security Systems User Manual F.01U.252.699 | V1.1 | 2012.01
4.3.10 Tracking function
1. Select the parameter Nr. 07 and press .
2. Activate (YES) or deactivate (NO) the tracking function. Confirm with .
4.3.11 Dementia criterion
1. Select the parameter Nr. 08 and press .
2. Activate (YES) or deactivate (NO) the dementia function.
If you select YES, define the range of automatic dementia gates. Choose the standard range
(231 to 254) or the extended range (128 to 254). Confirm with .
4.3.12 Assistance alarm from S35Q, S37Q and S37L transmitters
1. Select the parameter Nr. 09 and press .
2. Deactivate (OFF) or set the time frame between 05 and 30 seconds. Confirm with .
NOTICE!
The tracking function is not available if the locating mode is set to OFF.
See Section 4.2.3 Locating mode, page 24.
¬ Parameter Nr. 07
Tracking ¡
¬ Tracking
-> NO ¡
NOTICE!
The dementia criterion is not available if the locating mode is set to OFF.
See Section 4.2.3 Locating mode, page 24.
¬ Parameter Nr. 08
Dementia ¡
¬ Dementia
-> NO ¡
¬ Dementia Gates
Standard 231-254 ¡
¬ Parameter Nr. 09
Assistance Alarm ¢
¬ Assistance Alarm
-> OFF ¢