40 en | Programming NurseCall Main Unit
F.01U.252.699 | V1.1 | 2012.01 User Manual Bosch Security Systems
4.5.4 Erasing an alarm transmitter
1. Select the alarm transmitter type with and .
2. Confirm with .
3. Press to erase the transmitter.
4. Press the button of the transmitter or enter the transmitter’s ID code.
XXXX is the ID code of the transmitter.
5. Press to continue erasing the transmitter or to abort.
The unit then goes back to the alarm transmitters menu.
4.5.5 Programming an acknowledgement transmitter
1. Select the acknowledgement transmitter type with and .
2. Confirm with .
3. Press to program the transmitter.
4. Press the button of the transmitter.
XXXX is the ID code of the transmitter.
The unit then goes back to the acknowledgement transmitters menu.
¯ Transmit. type : 0
Alarm Transmitter £
OK:Program
0:Erase ¤:Info
¯´ Press Radio
Button or enter ID
¯ Erase Radio XXXX
OK:Continue C:Abort
¯ Transmitter XXXX
Erased
¯ Transmit. type : 1
Ack. Transmitter ¢
OK:Program
0:Erase ¤:Info
¯´ Press Radio
Button
Ack. Transmit.:1
Free:4 Code XXXX
To Next Page
Loading...
