46 en | Troubleshooting and error messages NurseCall Main Unit
F.01U.252.699 | V1.1 | 2012.01 User Manual Bosch Security Systems
6 Troubleshooting and error messages
6.1 "Radio in use" message
If you program a transmitter already stored as an alarm transmitter, an error message displays
Press to program the transmitter, this overwrites the values. Press to abort.
6.2 "Alarm Transmitter NOT stored" message
If you erase an alarm transmitter that is not already stored, an error message is displayed:
The unit repeats the error message then skips back to the erasing menu.
6.3 "Alarm Transmitter already stored" message
If you program an acknowledgement transmitter that is already stored as an alarm
transmitter, an error message is displayed:
The unit then skips back to the programming menu.
6.4 "Ack. Transmitter NOT stored" message
If you erase an acknowledgement transmitter that is not already stored, an error message is
displayed:
The unit repeats the error message then skips back to the erasing menu.
6.5 "Ack. Transmitter already stored" message
If you program a transmitter that is already stored as an acknowledgement transmitter, an
error message is displayed:
The unit then skips back to the programming menu.
6.6 The green button does not work
Problem: you have tried unsuccessfully to acknowledge an alarm with the Green button.
Cause: the local acknowledgement is disabled.
Solution: activate the local acknowledgement function.
See Section 4.3.6 Local acknowledgement setting, page 31.
¯ Radio in use!
OK:Continue C:Abort
¯ Alarm Transmitter
NOT stored!
¯ Alarm Transmitter
already stored!
¯ Ack. Transmitter
NOT stored!
¯ Ack. Transmitter
already stored!
To Next Page
Loading...
