When the configuration download fails and the message in the window above changes to
STATUS: Downloading data failed there is a wave file in the configuration with misinterpreted
data. The file might be created with Audacity. Files created with R8brain do not suffer from
this.
Can’t retrieve the original wave files with the configuration
download
Please note that the names of wave files, messages, message templates, zones and zone
groups are not stored in the Controller and therefore cannot be retrieved. However all data is
still there in the right place leaving a correctly functioning configuration. The names taken are
default names followed by an incremental number. The default names are listed below:
Label or file type Default name
Wave file Wave#.wav
Message name Message #
Template name Template #
Controller Zone Controller Output Z#
Router Zone Router # Output Z#
Zone Group Group #
Table 8.1: Default file names
The wave files will be stored in the folder C:\Program Files\Bosch\Plena Voice Alarm System
\Configuration\Sounds\Backup, or C:\Program Files (86)\....., or C:\Bosch\Plena....
8.17
104 en | Troubleshooting Plena
2013.07 | V2.0 | Installation and Operation manual Bosch Security Systems B.V.
To Next Page
Loading...
