Bosch Plena - Trigger Inputs

Trigger inputs
Introduction
The voice alarm controller has a terminal block to which 6 emergency (EMG) and 6 business
trigger inputs can be connected. Third party systems can use the trigger inputs to start
emergency and business calls in the Plena Voice Alarm System. The trigger inputs must be
configured with the configuration software.
Emergency trigger inputs
The upper part of the terminal block contains the emergency trigger inputs. The emergency
trigger inputs have a higher priority than the business trigger inputs.
1 2 3 4 5 6
VOX Switch
1 2 3 4 5 6
24V
DC out
10K 10K
Figure 5.19: Connecting emergency trigger inputs
5.1.13
64 en | Connection Plena
2013.07 | V2.0 | Installation and Operation manual Bosch Security Systems B.V.