Notice!
See the Configuration Software Manual for more information about the configuration
software.
Select zones
Select the zones to which the business call must be distributed with the zone selection
buttons on the call station or its keypads. A green LED indicates the zones to which the
business call is distributed.
– If the indicator of a button is off, the zone is not selected. Push the button to select the
zone.
– If the indicator of a button is on, the zone is selected. Push the button to deselect the
zone.
Notice!
The zone selection buttons of the call stations and call station keypads must be configured
with the configuration software.
Notice!
See the Configuration Software Manual for more information about the configuration
software.
Make the announcement
Push the push‑to‑talk (PTT) button of the call station to make an announcement. The call is
only distributed to the selected zones.
Figure 7.7: PTT button and indicators
The LEDs above the PTT button provide information about the status of the call station.
7.3.1
7.3.2
90 en | Operation Plena
2013.07 | V2.0 | Installation and Operation manual Bosch Security Systems B.V.
To Next Page
Loading...
