Bosch Plena - Background Music (BGM) Control

– After the settings of the connected loudspeakers have been changed.
Background music
The background music (BGM) is controlled using the BGM controls on the front of the voice
alarm controller, voice alarm router and their remote control and remote control extensions.
Proceed as follows to route BGM:
1. Select the BGM source (see section Select BGM source, page 88).
2. Select the zones (see section Select zones, page 88).
Select BGM source
Select the BGM source with the Select button on the front of the voice alarm controller. A
green LED indicates the source that is selected.
– If the source is a CD player or a tuner that is connected to the CD/Tuner input, choose
CD/Tuner.
– If the source is an auxiliary source that is connected to the Aux input, choose Aux.
0
-
+
-
+
CD/Tuner
Aux
Select
Zone select
Figure 7.3: BGM source selector
Select zones
The BGM is distributed to the zones with the Zone select buttons on the voice alarm
controller, voice alarm router, remote controls and remote control extensions. A green LED
indicates the zones to which BGM is distributed.
– If the Zone select indicator is off, no BGM is distributed to the zone. Push the Zone select
button to distribute the BGM to the zone.
– If the Zone select indicator is on, BGM is distributed to the zone. Push the Zone select
button to stop distributing the BGM to the zone.
Zone select
0
-
+
-
+
CD/Tuner
Aux
Select
Figure 7.4: BGM zone selector
7.2
7.2.1
7.2.2
88 en | Operation Plena
2013.07 | V2.0 | Installation and Operation manual Bosch Security Systems B.V.