Speech filter
If switch 7 is in the ON position, a speech filter is activated for the call station. The speech
filter improves the speech intelligibility by cutting off the lower frequencies.
Termination
The last call station in a sequence of looped-through call stations must always be terminated.
Only for these call stations, put switch 8 in the ON position.
Notice!
The Controller comes with a termination plug (RJ45). Plug this connector in the unused RJ45
socket.
6.4.3
6.4.4
84 en | Configuration Plena
2013.07 | V2.0 | Installation and Operation manual Bosch Security Systems B.V.
To Next Page
Loading...
