Technical data
Electrical
Voice Alarm Controller
Electrical
Mains voltage: 230/115 V(AC), ± 10%, 50/60 Hz
Mains current: 0.3 A (system idle)
4.0 A (maximum load)
Max. mains inrush current: 6.3 A (for mains voltage of 220 - 240 V)
10 A (for mains voltage of 100 - 120 V)
Battery voltage: 20.0 to 26.5 V(DC)
Battery current: 0.9 A (system idle)
14 A (maximum load)
Notice!
Maximum load means maximum power out, maximum load 24 V(DC) out and maximum
number of call stations.
Message manager
Data format: WAV-file, 16-bit PCM, mono
Supported sample rates (fs): 24 kHz, 22.05 kHz, 16 kHz, 12 kHz, 11.025
kHz
Frequency response:
@ fs = 24 kHz, 100 Hz - 11 kHz (+1/-3 dB)
@ fs = 22.05 kHz, 100 Hz - 10 kHz (+1/-3 dB)
@ fs = 16 kHz, 100 Hz - 7.3 kHz (+1/- 3 dB)
@ fs = 12 kHz, 100 Hz - 5.5 kHz (+1/-3 dB)
@ fs = 11.025 kHz, 100 Hz - 5 kHz (+1/-3 dB)
Distortion: < 0.1% @ 1 kHz
Signal-to-noise ratio (flat at max. volume): > 80 dB
Memory capacity: 64 Mbit Flash
Recording/playback time: 333 s @ fs = 24 kHz
Number of messages: max. 254 wave files
Supervision EEPROM: Continuous checksum control
Supervision DAC: 1 Hz pilot tone
Data retention time: > 10 years
10
10.1
10.1.1
106 en | Technical data Plena
2013.07 | V2.0 | Installation and Operation manual Bosch Security Systems B.V.
To Next Page
Loading...
