MY22Z0a - 12_1.0_25.07.2022
124
Operation
6.5.9.4 Replacing brakes
Not included in price
6.5.9.5 Retracting the brake linings
Disc brakes require wearing-in time. The braking
force increases over time. The braking force is
increased during break-in time. This is also the case
when the brake pads or brake discs are replaced.
1 Accelerate pedelec to 25 km/h.
2 Brake pedelec until it comes to a halt.
3 Repeat process 30 to 50 times.
The disc brake is retracted and provides
optimal braking power.
Brake components may only be replaced with
original components.
In the case of disc brake pads, the optimum pad
compound may be adapted to the surface and
the rider’s experience.
To Next Page
Loading...
