MY22Z0a - 12_1.0_25.07.2022
150
Operation
6.5.17.3 Adjusting the RockShox threshold
Only applies to pedelecs with this equipment
.
Figure 167: The lever’s open position (1) and threshold
position (2)
Place threshold lever in the threshold
position (2).
The threshold function is switched on.
Place threshold lever in the open position (1).
The threshold function is switched off. The
damper can deflect quickly and unhindered.
Figure 168: Changing compression adjuster to a harder
setting
To increase sensitivity to small bumps, turn
compression adjuster anti-clockwise to
decrease damping and hardness and increase
the deflection speed.
To Next Page
Loading...
