Bosch ZEMO SU-E FS 12 - Adjusting the Rockshox Rear Frame Damper

MY22Z0a - 12_1.0_25.07.2022
146
Operation
6.5.16.1 Adjusting the RockShox rear frame damper
Only applies to pedelecs with this equipment
Figure 163: Position and shape of the rebound adjuster (red) depends on the model
 The sag in the rear frame damper is adjusted.
 Turn rebound adjuster in the clockwise
direction.
 The rebound damping is increased.
 Turn rebound adjuster in the anti-clockwise
direction.
 The rebound damping is reduced.
2.5