MY22Z0a - 12_1.0_25.07.2022
95
Assembly
5.3.5 Preparing the LIMOTEC seat post
Only applies to pedelecs with this equipment
1 Use the seat height formula to calculate the
optimum seat post height for leg length:
Seat height (SH) = inner leg length (I) × 0.9
2 Lower the seat post further into the seat tube
3 The seat post Bowden cable must be tightened
in the frame up to the remote control to the
same length as the seat post was lowered.
4 Trim the seat post Bowden cable on the
handlebars if necessary.
To Next Page
Loading...
