MY22Z0a - 12_1.0_25.07.2022
148
Operation
6.5.17.1 Adjusting the Suntour compression adjuster
Only applies to pedelecs with this equipment
Figure 165: Suntour compression adjuster (1) on the rear
frame damper
1 Set the compression adjuster to the middle
position.
2 Ride the pedelec over a small obstacle.
Turn compression adjuster anti-clockwise.
The damping and compression hardness is
reduced. The deflection stroke speed is
increased.
Turn compression adjuster clockwise.
The damping and compression hardness is
increased. The deflection stroke speed is
reduced.
3 The ideal setting for the rebound damper has
been achieved when the rebound movement of
the rear wheel feels comparable to that of the
front wheel.
To Next Page
Loading...
