Bosch ZEMO SU-E FS 12 - Page 4

MY22Z0a - 12_1.0_25.07.2022
3
Contents
3.5.8.3 SELLE ROYAL 66
3.5.9 Puncture protection level 67
3.5.9.1 SCHWALBE 67
3.5.10 Torque 68
4 Transporting and storing
4.1 Weight and dimensions for transportation 75
4.2 Designated handles, lifting points 77
4.3 Transporting 78
4.3.1 Using the transport securing system 78
4.3.2 Transporting the pedelec 78
4.3.3 Shipping a pedelec 78
4.3.4 Transporting the battery 78
4.3.5 Shipping the battery 78
4.4 Storing 79
4.4.1 Pedelec 79
4.4.2 On-board computer, display and charger 79
4.4.3 Rechargeable battery 79
4.4.4 Break in operation 80
4.4.4.1 Preparing a break in operation 81
4.4.4.2 Carrying out a break in operation 81
5 Assembly
5.1 Unpacking 82
5.2 Required tools 82
5.3 Commissioning 83
5.3.1 Checking the battery 83
5.3.1.1 Securing the PowerTube BS3 battery mount 84
5.3.2 Preparing the wheel 89
5.3.3 Installing the wheel in the SUNTOUR fork 90
5.3.3.1 Screw-on axle (12AH2 and 15AH2) 90
5.3.3.2 20 mm cross axle 91
5.3.3.3 Q-LOC quick release 93
5.3.4 Fitting the pedals 94
5.3.5 Preparing the LIMOTEC seat post 95
5.3.6 Checking the stem and handlebars 96
5.3.6.1 Checking the connections 96
5.3.6.2 Checking stem is firmly in position 96
5.3.6.3 Checking the bearing clearance 96
5.4 Selling the pedelec 96
6 Operation
6.1 Risks and hazards 97
6.2 Tips for a greater range 99
6.3 Error message 100
6.3.1 On-board computer 100
6.3.1.1 Less critical errors 100
6.3.1.2 Critical errors 100
6.3.2 Rechargeable battery 100
6.4 Instruction and customer service 101
6.5 Adjusting the pedelec 101
6.5.1 Preparing 101
6.5.2 Pedelec adjustment procedure 102
6.5.3 Saddle 103
6.5.3.1 Replacing the saddle 103
6.5.3.2 Determining saddle shape 103
6.5.3.3 Determining minimum saddle width with corrugated cardboard 105
6.5.3.4 Determining minimum saddle width with gel cushion 105