Bowa ARC 350 - Page 107

10 Technical specifications
900-351_IFU_V2.0.0_20221-S0-20150520-EN Operating Manual ARC 350 107
Monopolar Coagulation – Laparoscopy
Measurement at ohmic resistances
 Diagram of power output P [W] as a
function of the load resistance R [] for
the setting "Monopolar Coagulation
Laparoscopy"
= 60 W
Measurement at ohmic resistances
 Diagram of power output P [W] as a
function of the load resistance R [] for
the setting "Monopolar Coagulation
Laparoscopy"
= 120 W
 Diagram of power output P [W] as a
function of the setting "Monopolar
Coagulation Laparoscopy"
Rated load resistance = 500 
 HF output voltage U [Vp] for the setting
"Monopolar Coagulation Laparoscopy"
(idle mode)
= 1800 Vp