Bowa ARC 350 - Page 95

10 Technical specifications
900-351_IFU_V2.0.0_20221-S0-20150520-EN Operating Manual ARC 350 95
Monopolar Coagulation – Forced non cutting
Measurement at ohmic resistances
 Diagram of power output P [W] as a
function of the load resistance R [] for
the setting "Monopolar Coagulation
Forced non cutting"
= 40 W
Measurement at ohmic resistances
 Diagram of power output P [W] as a
function of the load resistance R [] for
the setting "Monopolar Coagulation
Forced non cutting"
= 80 W
 Diagram of power output P [W] as a
function of the setting "Monopolar
Coagulation Forced non cutting"
Rated load resistance = 1000 
 HF output voltage U [Vp] for the setting
"Monopolar Coagulation Moderate"
(idle mode)
= 3500 Vp