Note: The firmware updates are provided by the manufacturer of the device to improve its
functionality but the installation is always made under the responsibility of the user and is in
no case obligatory.
11.8.2 Restore Defaults
Restores your device to factory default settings. However, your bookmarks/notes and device
settings will be lost. Perform necessary backup actions, for example, taking notes on a paper,
before restoring your device.
11.8.3 Device information
With this option you can consult information about your bq like the device ID, the Mac
address, internal and external memory, the u-boot and kernel version etc.
11.8.4 Screen protector or screen saver
The screen saver activates when your bq hasn’t been used for a while. Whit this option you can
adjust the time to 5, 10 or 30 minutes. You can also activate and deactivate the function.
11.8.5 Authorize device
In order to activate your device, first you have to be connected to the internet. If your bq is not
connected, when you select this option the message will appear on screen "Wi-Fi is off. Please
press [ON] to turn on Wi-Fi. Press ON.
Once you are connected to the Internet (for more information regarding Internet connection,
see chapter 9 “Internet”) you can choose to authenticate if you already have an Adobe ID or
create a new account.
You can create an account using your device, however we recommend for your own comfort
to use a PC or laptop. To create an Adobe Digital Editions account, please follow the next
steps:
1. Go to: www.adobe.com/cfusion/membership/index.cfm
2. Click on Create an Adobe account
To Next Page
Loading...
