Brady BBP 37 - Page 156

Application Label Types
BBP
®
35/37 User’s Manual 140 Rev A
To use a Standard Pipe Marker label type:
1. From the Home Page, touch Pipe Marker , then touch Create New File
.
OR
Access Pipe Marker label type according to procedures on page 111.
2. On the Pipe Marker Style screen, touch Standard .
3. In the Dimensions dialog, choose a Tape Width that corresponds to the diameter of your
pipe, then touch Next .
In the Pipe contents dialog box, choose the type of material that flows through the pipe.
4. Touch the up/down arrows to view more options in the list.
5. When found, touch the desired contents option to select it, then touch Next .
The material selected determines the pipe marker colors based on the selected color norm in
the Pipe Marker setup menu. (See page 143 for Pipe Marker setup.)
6. On the Legend screen, touch Legend line 1: data field, and enter the text to display on the
label.
7. To enter special characters, touch , then enter the character(s). See “Typing Special
Characters” on page 56 for more detail.
You can add additional data in the Legend line 2: and Supplemental data: fields. Be aware,
however, that entering more than one line of text may reduce the font size to a point where it
no longer meets the pipe marking standard for the selected color norm.
8. When ready, touch Next .
You can add up to four graphics to the pipe marker label. The available graphics are divided
into categories. To change to another category:
9. Touch Change Category .
10. Under Categories, touch the up/down arrows to view more categories in the list.
11. Touch the desired category to select it, then touch OK .