M611 Label Printer User Manual 12
Setup
Connecting the Printer
2. Tap Connection.
3. Tab Bluetooth.
4. Swipe the switch to the right to enable or left to disable.
To connect the printer to a mobile device via Bluetooth:
1. Turn on the printer.
2. Enable Bluetooth on the printer if it is not already.
3. Open the Express Labels app on your mobile device.
4. Select the M611 Label Printer.
The software detects the new printer.
5. Change the printer name, if desired, and tap the control to connect the printer.
USB
To connect to a computer via USB 2.0, plug the provided USB cable into the printer and the computer.
Brady Workstation software automatically detects the printer when connected via USB cable.
Wi-Fi
Connect to a Wi-Fi network either by searching for and selecting a network or by manually entering the
network settings. Once connected, the printer can communicate with devices on that network.
Note: Wi-Fi capability is not available on all printers or in all countries.
Note: The on-screen keyboard for entering passwords and user names contains only the
characters allowed for network user names and passwords. Thus, you may see a keyboard
that differs from those you have enabled in Settings.
Search to Connect
This is the easiest and most common method for connecting.
To connect to a Wi-Fi wireless network:
1. Make sure the printer is turned on.
2. Tap Settings.
3. Tap Connection.
To Next Page
Loading...
Need help?
General
