M611 Label Printer User Manual 37
Maintenance
Replacing the Cutter Blade Cover
Replacing the Cutter Blade Cover
If the printer is accidentally dropped, the cutter blade cover may come loose or fall out. If the blade
cover is not dented or damaged in some other way, you can easily re-insert the blade cover into the
printer.
CAUTION! When removing jammed material from the cutter, do not use sharp
objects such as a screwdriver because they may damage the print
head. Use tweezers to grasp the material.
Do not insert fingers near cutter. It could pinch or cut.
WARNING! Turn off the printer before replacing the cutter blade cover.
sides of cutter housing
flap
metal tabs
cutter blade cover
To Next Page
Loading...
